Characteristic
- The machine introduction & absorption of European technology / process manufacturing, supporting / full functional.
- After mounting the plate and registration, no longer need registration, improve yield.
- Replacing 1 set of Plate Roller (unloaded old roller, installed six new roller after tightening), only 20 Minute registration can be done by printing.
- The machine first mount plate, pre-trapping function, to be completed in advance prepress trapping in the shortest possible time.
- Maximum production machine speed up 200m/min, registration accuracy ±0.10mm.
- The overlay accuracy does not change during lifting running speed up or down.
- When machine stop, Tension can be maintained, the substrate is not deviation shift.
- The whole production line from the reel to put the finished product to achieve non-stop continuous production, maximize product yield.
- With precision structural, easy operation, easy maintenance, high degree of automation and so on, only one person can operate.
technical specifications
| Model |
CHCI4-600E |
CHCI4-800E |
CHCI4-1000E |
CHCI4-1200E |
| Max. Web value |
650mm |
850mm |
1050mm |
1250mm |
| Max. Printing value |
550mm |
750mm |
950mm |
1150mm |
| Max. Machine Speed |
300m/min |
| Printing Speed |
250m/min |
| Max. Unwind/Rewind Dia. |
φ800mm |
| Drive Type |
Gear drive |
| Plate thickness |
Photopolymer plate 1.7mm or 1.14mm (or to be specified） |
| Ink |
Water base ink or solvent ink |
| Printing length (repeat) |
400mm-900mm |
| Range Of Substrates |
LDPE; LLDPE; HDPE; BOPP, CPP, PET; Nylon，PAPER，NONWOVEN |
| Electrical supply |
Voltage 380V. 50 HZ.3PH or to be specified |
Unwinder unit
Single unwind central drive , with servo motor ,Inverter control Closed-loop.
Printing Unit
- Color: 4 Color
- Drive mode: Gear Drive
- Drive motor : Servo Motor drive ; Inverter control close loop control
- Printing way : 1)Plate -Photopolymer plate ; 2)Ink--water base or solvent ink
- Printing Repeat: 400-900mm
- Gearing of printing cylinder: 5mm
Doctor blade
- Chamber blade 4 pcs
- Both way blade aluminium alloy ink box.
- Closed ink tank(original import use life 30-60days).
- Blade open and close by manual (Safety).
- Equipped with doctor chamber for fast change.
- It is made from Aluminum alloy and closed type to reduce solvent volatilization and keep the ink in good viscosity and clean.
- There is forward and reverse directions doctor inside the chamber. The reverse doctor is for sealing the chamber and the forward doctor is for scratching the ink.
Big Central Drum
- Surface of central press roller with constant temperature.
- ±0.008mm
- Diameter: Ф1200mm
- Made in China
Dryer between each color
- Electrical heating, transformed into circulating air heating by heat exchanger. Temperature control adopts intelligent temperature control, contactless solid-state relay, set 2 control, suit to different technology、environment production, save energy consumption, enforce PID temperature control and temperature control precision,±2℃.
Drying system
- Hot air mode:Electrical heating, transformed into circulating air heating by heat exchanger. Temperature control adopts intelligent temperature control, contactless solid-state relay, set 2 control, suit to different technology、environment production, save energy consumption, enforce PID temperature control and temperature control precision,±2℃.
Drying oven structure
- Drying oven inner container.
Single rewind
- One unit use center drive rewind,servo motor ,Inverter closed-loop control.
Image static monitoring system
- Display resolution: 1280*1024
- Enlargement factor: 3-30（Enlargement factor of area）
Printing Samples